English: +1 (404) 817.9300  |  Español: +1 (404) 994.2496  | 

Buy Used MR925 by JBL

MR925

JBL
As a stage speaker or a pole mountedspeaker, the MR925 is a truly great general purpose sound reinforcement system for speech or vocals, full-range music playback, or reproduction of amplified musical instruments. It's built with a 15" low frequency transducer and a pure titanium compression driver on a 100deg x 80deg Flat-Front Bi-Radial horn.The LF driver produces strong bass output while the compression driver/horn smoothly disperses mid-and high-frequencies over an optimum field.
Also Known As: Used MR925
View All Used Drivers and Horns, View All Used JBL

Used & New Prices

Used Price - USD View Used Prices
We can find this item used for you. Find This Product Used
New Price Request a New Price Quote Get New Price

Used MR925 For Sale

Contact a Sales Specialist about used MR925 for sale.
+1.404.817.9300

MR925 Drivers and Horns

...mum field.
JBL

JBL Drivers and Horns

James Bullough Lansing was born James Martini, 14 January 1902, in Macoupin County, Millwood Township, Illinois. His parents were Henry Martini, born in St. Louis, Missouri, and Grace Erbs Martini, born in Central City, Illinois. The elder Martini was a coal mining engineer, and his work required that the family moved about quite a bit during Lansing's early years. Lansing was the ninth of fourteen children, one of whom died in infancy. For a short time, Lansing lived with the Bullough family in Litchfield, Illinois. He later took their name when he changed his from Martini to Lansing. Not much is known about Lansing's early days, and we are indebted to Bill Martin, one of three surviving brothers, for providing most of the information presented here. Lansing graduated the eighth grade at the Lawrence School in Springfield, Illinois. He also attended the Springfield, Illinois, High School. Later, he took courses in a small business college in Springfield. As a young lad he was very interested in all things electrical and mechanical. At about the age of 10, he built a Leyden Jar which he used to play pranks on his playmates. He also constructed crystal sets, and at one time, probably about the age of 12 or so, built a small radio transmitter from scratch. The signals from this set were apparently strong enough to reach the Great Lakes Naval Station in Illinois; naval personnel determined the source of these signals and later supervised the timely dismantling of the young Lansing's radio transmitter. For a while Lansing worked as an automotive mechanic, specializing in fine engine repair work. He attended an automotive school for mechanics in Detroit through the courtesy of the dealer he worked for in Springfield. Lansing's mother died 1 November 1924 at the age of 56, and at that time Lansing left home. As best we can determine, he went directly to Salt Lake City. Mrs. Lansing, the former Glenna Peterson of Salt Lake City, tells of meeting Lansing in 1925 in that city. At the time he was working for a radio station as an engineer. In addition, he worked for the Baldwin loudspeaker company in Salt Lake City for a time. He also met his future business partner, Ken Decker, in Salt Lake City.
Working Lights - Stage or auditorium lights, independent of the main theatrical system, used during rehearsals and while the crew sets up or breaks down the stage. Also, low wattage lights used to illuminate offstage. Used . obstacles and props tables unseen by the audience.. Used . ...

Depth of Field - While a lens focuses on a single plane of depth, there is usually an additional area in focus behind and in front of that plane. This is depth of field. Depth of field increases as the iris is closed.. Used . There is more depth of field the wider the lens and le . Used . ...

Windshield - Foam cover for microphones that reduces the interferance caused by wind and breath allowing the microphone to pick up the desired sounds.. Used . . Used . ...

Communications - Communication gear is essentially used to relay information to different individuals or teams during a show or performance to insure everything, including audio, lighting and staging are timed correct. Used . ly and functioning properly and safely. . Used . ...

Ground Support - In Staging, Ground Support applies to any electrical or mechanical device to aid a rigging crew in lifting and placing staging gear, lighting or audio gear into place.. Used . . Used . ...

Drivers and Horns

Drivers and horns refer to loudspeakers that employ a horn to boost the speaker driver element‚??s efficiency. The ‚??speaker horn‚?? is basically a kind of electromagnetically driven diaphragm. The horn used in drivers and horns doesn‚??t actually do anything to enhance or amplify sound coming from the cabinet driver itself ‚?? it is passive. All it does is to give the coupling efficiency between the air and the speaker driver a boost. Drivers and horns essentially serve to match the impedance between the low density of outside air and the high density of the speaker horn diaphragm. Drivers and horns are perhaps best put to use in concerts and PA systems, where sound reinforcement is needed. This can be provided by the high sound pressure that drivers and horns produce, although the sound‚??s fidelity may be compromised when they are employed. Cabinet horn loudspeakers are also popular in concert venues, as they are able to reproduce high volume bass sounds. In concert venues, drivers and horns are commonly called a bass driver, or a tweeter, and are employed so that the bass is not just heard but also ‚??felt‚?? by the audience. Multiple drivers and horns cab be combined into an array to boost the sound pressure even further, and this is more preferable than using a single horn that has a larger ‚??mouth‚?? area, as an array such as this affords greater output power. Drivers and horns have other, more specialized uses. They can be used to extend a speaker driver‚??s low frequency limit, and they are able to modify a sound wave‚??s directional characteristics at both the horizontal coverage angle and the vertical coverage angle, depending on the width and height of the horn.
Popular Drivers and Horns
Low Frequency Driver
The best performing speaker in its class, the PSX-123 offers the flexibility to be used as a stand-alone system or augmented with our subwoofers. The high frequency driver is coupled to a 100 x 50 horn and the mid-range transducer is loaded into...
Acceding to generous requests from professional installers and DJs worldwide, intuitive Cerwin-Vega engineers have produced the best popular format dual 15" 3-way system available in its price range.The V-253 is a 3-way system with two 15"...
Cerwin-Vega had to create a new specification to describe the V-152. The V-152 is a simple solution to a complex problem: How to outperform competing brands claiming performance-for-dollar value. Utilizing our advanced transducer technology...
For nearly 50 years Cerwin-Vega has been designing and building durable and efficient sound systems for cinemas, discos and live concerts worldwide. Designed for a variety of professional applications, the V-122 extends the legacy of high...

$58,000
€52.755
Most of these units are under 500 hour...

$4,428
€4.028
grandMA Light in good condition. Previ...

$2,368
€2.050
Corporate used UR4D+ set in mint condi...

$34,082
€29.500
Hard to find at an incredible price. P...

Glossary
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z