Used Jands

Intensity - Measured in both lux and lumens. For any given luminaire (lighting instrument or fixture), this depends upon the power of the bulb, the design of the instrument (and its corresponding efficiency), the. Used . presence or absence of color gels or gobos, distance from the area to be lit, the color and subtance to be lit, and the neuro-optics of the total scene (that is, the relative contrasts to ot. Used . her regions of illumination). ...

Mixers - A mixer is an electronic device for combining or "mixing" audio signals by routing and changing the level, tone, and/or dynamics of the audio signals. A mixer can mix analog or digital signals depend. Used . ing on the type of mixer. The modified signals are then combined to produce a unified signal output. Mixers can vary in size and function ranging from small format having a few inputs for a . Used . DJ to large format having dozens of inputs for studio recording....

Zirconium Lamp - A high intensity point source arc lamp using a zirconium oxide cathode in an argon-filled bulb. Used in powerful projectors because of its low emanation of long-wavelength light and its concentrated . Used . source. Similar to the Drummond light or Limelight, but differing from them chiefly in the employment of cones of zirconium instead of cylinders of lime. It has been outdated and replaced b. Used . y electric lighting....

Audio - Audio is the science and art of recording or reproducing sound through mechanical or electronic means. The field includes many disciplines, such as electrical engineering, acoustics, and music with de. Used . sign, installation and operation of sound recording and reproduction equipment as the focus. . Used . ...

Cue - Generally, a lighting board operator has a cue sheet for each scene, which is a diagram of the board with the faders in their positions as determined by the lighting designer. The operator sets the fa. Used . ders into their positions based on the cue sheets. Typically during a cue, the operator sets the next scene. Then, the operator makes the transition between the scenes using the cross-fader.. Used . ...