The
MAC 2000 Wash is a 1200 Watt moving head wash light that provides CMY color mixing, color correction (CTC), two color wheels (each with four removable colors), a combined dimmer/shutter. 540deg of pan, and 267deg of tilt. It has a
Fresnel lens fitted as standard, and is also supplied with a PC lens and a super-wide-angle lens. Motorized zoom provides beam angle ranges of 11deg through to 40deg (
Fresnel), 12deg through to 34deg (PC lens), or 66deg through to 80deg (super-wide-angle lens). It is fitted with an electronic ballast for flicker-free operation and an economic power-saving mode. It also has a switch mode
Power Supply allowing it to
Used Martin
Martin is the maker and distributor of entertainment control and intelligent lighting and effects. Martin uses the latest technologies to create these amazing machines for the entertainment industry. Martin is also a maker of high end sound systems known as
PAR - PAR is an acronym referring to "Parabolic Aluminized Reflector" which describes the mirror configuration. PAR lights resemble car headlights. They possess a lens, but the lens is an integral part of t. Used . he lamp and its position relative to the filament canno . Used . ...
Wings and Processors - Wings and processors are used to extend the capabilities of lighting control consoles. Wings usually add faders, bump buttons, displays, and other functions to the console while processors consolidate. Used . , alter, redirect or synchronize the signals coming to and from the console. Consoles often have wings designed specifically for use with that console, but processors are more generalized.. Used . ...
Lighting instruments - There are a variety of instruments frequently used in the theater. Although they vary in many ways they all have the following four basic components in one form or another...
* Box/Housin. Used . g - a metal or plastic container to house the whole instrument and prevent light from spilling in un-wanted directions.
* Source of light (bulb or lamp).
* Lens or opening - the g. Used . ap in the housing where the light is intended to come out.
* Reflector - behind or around the light source in such a way as to direct more light towards the lense or opening.
Additional feat...
A1 - A1 is Lighting Industry Forum code for lamps that are origianally recommended for projection.
Here are all the codes:
CP: Film, Television &Photographic studio (3200K)
. Used . A1: Projection
T: Theatre (3000K)
P2: Photoflood (3200K)
K: General Purpose Flood Lighting (2850K) . Used . ...
Working Lights - Stage or auditorium lights, independent of the main theatrical system, used during rehearsals and while the crew sets up or breaks down the stage. Also, low wattage lights used to illuminate offstage. Used . obstacles and props tables unseen by the audience.. Used . ...
Used Moving Lights
Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting.
Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator.
Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators.
Moving lights are hooked up to a lighting control console and send data to it in one of three ways ?? through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard).
So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the ??personality? of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them ??live?, if they have the experience to do so.