Dimmers and Distro - Dimmers are devices used to vary the brightness of a light or stage light and are usually controlled remotely by a lighting console or controller by way of a protocol that is usually DMX. A Distro is . Used ProSpot 250 LX. a device that distributes power to many devices.. Used ProSpot 250 LX. ...
Smoke Machine - A Smoke Machine or Fogger is an electrical device that creates clouds of artificual and hopefully non-toxic fog. The fog may come in different colors or smells and may be water or mineral based. It i. Used ProSpot 250 LX. s used for effects in theatre, staging, concerts and clubs.
Hazers by contrast create a more diffusive, expansive haze that is usually not a thick and is used to en. Used ProSpot 250 LX. hance other effects, such as lighting and light beams.
Color - Color temperature is measured in kelvins, and gel colors are organized by several different systems maintained by the color manufacturing companies. The apparent color of a light is determined largel. Used ProSpot 250 LX. y by the gel color given it, but also in part by the power level the lamp is being run at and the color of material is it to light. As the percentage of full power a lamp is bei. Used ProSpot 250 LX. ng run at drops, the tungsten filament in the bulb glows orange instead of more nearly white. This is known as amber drift or amber shift. Thus a 1000-watt instrument at 50% will appear far more orange than a 500-watt instr
Ballyhoo - A set of programmed moves for automated lights where the lights move randomly within a specific area.. Used ProSpot 250 LX. . Used ProSpot 250 LX. ...
Lighting instruments - There are a variety of instruments frequently used in the theater. Although they vary in many ways they all have the following four basic components in one form or another...
* Box/Housin. Used ProSpot 250 LX. g - a metal or plastic container to house the whole instrument and prevent light from spilling in un-wanted directions.
* Source of light (bulb or lamp).
* Lens or o. Used ProSpot 250 LX. pening - the gap in the housing where the light is intended to come out.
* Reflector - behind or around the light source in such a way as to direct more light towards the lense or opening.
Additional feat...