Used EPS ll 60

EPS ll 60

The ESPII 60 console is primarily designed for the control of devices featuring DMX input circuitry such as dimmers racks and colour scrollers. Units requiring an analogue input (0 to +10 volts) can also be controlled if the console is fitted with optional analogue outputs.

Used Jands

Jands have been designing, building and operating lighting equipment since we made our first dimmer in 1970. Since then, our products have become a standard feature of lighting rigs the world over. Whatever country youâ??re in, ask an industry professional about Jands products and youâ??ll get the same response: â??reliable, good value, solid and dependable, go-anywhere do-anything, noise-free, just better.â?? But we donâ??t just offer our own lighting equipment, weâ??ve also identified the best products available from other manufacturers. This is why we can give you the best possible lighting solution, including ETC and Varilite products.

WYSIWYG - Acronym for "What You See Is What You Get," that is used in computing to describe a system where the content during editing appears very similar to the final product. Often employed in the context of . Used . software tools for lighting design and production administration or applied to TTL (through the lens) camera systems where the viewfinders have 100% film frame coverage. WYSIWYG lighting sof. Used . tware usually has fantastic 3D rendering of lighting states and direct connections to lighting consoles, enabling accurate visualisation of lighting designs. WYSIWYGs significantly increase the connection b...

Preset Boards - Preset boards are the most basic lighting consoles - and also the most prevalent in smaller installations. They consist of two identical fader banks, called 'scenes.' The faders (control slides) on th. Used . ese scenes can be manually adjusted. Each scene has the same number of channels which control the same dimmers, but only one is live at a time, so the console operator can build a scene, then. Used . fade to it. These scenes are often referred to as A-scenes and B-scenes, and a cross-fader is used to fade between the A and B scene.

Generally, a preset board operator has a cue sheet for each s...

Limelight - An early type of stage light in which an intense illumination is created when an oxyhydrogen flame is directed at a cylinder of lime, also called calcium oxide, which can be raised to white incandesce. Used . nce heat without melting to producing brilliant illumination. The limelight effect was discovered early in the nineteenth century by Goldsworthy Gurney. A Scottish engineer, Thomas Drummond. Used . , realized that the light would be useful for surveying and built a working version in 1826. Therefore, the light is sometimes known as the Drummond Light. The Limelights first theatrical use was in 1837 at ...

Address - In computer science, a memory address is a unique identifier for a memory location at which a CPU or other device can store a piece of data for later retrieval. In modern byte-addressable computers, e. Used . ach address identifies a single byte of storage; data too large to be stored in a single byte may reside in multiple bytes occupying a sequence of consecutive addresses. Some microprocessors . Used . were designed to be word-addressable, so that the typical storage unit was actually larger than a byte. Examples include the Texas Instruments TMS9900 and the National Semiconductor IMP-16, both of which used ...

LCD - A liquid crystal display is a low power, flat, thin display device made up of color or monochrome pixels arranged in front of a light source or reflector.


. Used . . Used . ...

Used Lighting Consoles

Lighting consoles are electronic devices for controlling multiple lights simultaneously from one point. Dimmers for controlling lighting intensity, automated lighting, fog machines and hazers are some of the special effects lighting devices controlled by a lighting board or lighting desk (other terms for lighting consoles). An electronic control protocol is used by lighting consoles to communicate with other devices in the lighting system. Some of these are DMX512, ACN and DMX-512-A. New protocols are being introduced as more sophisticated lighting systems become available. In the entertainment industry, where theatrical lighting design is mostly used, lighting consoles are usually found in the control booth, auditorium or the foyer. For this application, the most common protocol is DMX512. Lighting consoles are available in different sizes and complexities. A preset board, a conventional console for basic lighting systems, is used mostly for small setups. However, DJs may complement it with more advanced hybrid consoles. A moving light controller works with dimmers for controlling ordinary lighting. It also provides additional controls for automated stage lighting (also called intelligent lighting) to produce very complex lighting effects. Other types of lighting consoles include memory consoles, personal-control based controllers, and remote focus unit. The light board operator (also called the light op or board op) is the person who operates the lighting console. Depending on the scale and type of production, he can be the lighting designer or the stage manager. He or she is responsible for conventional or automated lighting fixtures as well as controlling video.