Used Complete 72 Circuit Power Distro System

120K Pre-Rig System - Like New ! Used less than 10 times
- Package of 4 units with case + controller
LX1 - Excellent condition and very well maintained
- HEVY DUTY UNDERHUNG SPOT-CHAIRS
2500 HMI - Includes Ballast
120K Pre-Rig System - Complete 120k rigging system
Nova 3.0G - CDRH Certified Laser projector
Sirio Mk 3 4K HMI - 208v, uses 4K HMI lamp
distro - 200amp , 3 phase + feeder & cables
- VL 3500 Wash FX
Maxedia PRO - European Version
Aramis Followspot - 208v 2.5K HMI Long throw

Used Motion Labs

Limelight - An early type of stage light in which an intense illumination is created when an oxyhydrogen flame is directed at a cylinder of lime, also called calcium oxide, which can be raised to white incandesce. Used . nce heat without melting to producing brilliant illumination. The limelight effect was discovered early in the nineteenth century by Goldsworthy Gurney. A Scottish engineer, Thomas Drummond. Used . , realized that the light would be useful for surveying and built a working version in 1826. Therefore, the light is sometimes known as the Drummond Light. The Limelights first theatrical use was in 1837 at ...

DMX-512 - DMX512, often shortened to DMX (Digital MultipleX), is a communications protocol used mainly to control stage lighting.

Developed by the Engineering Commission of USITT, the standard star. Used . ted in 1986, with subsequent revisions in 1990 leading to USITT DMX512/1990. ESTA took control of the standard in 1998 and began a revision process. The new standard, known officially as "Ent. Used . ertainment Technology — USITT DMX512–A — Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories", was approved by ANSI in November, 2004. This current standar...

Zoom Lens - A mechanical assembly of lens elements with the capability to vary its focal length allowing for a closer or farther view of a subject, without changing perspective. Zoom lenses are often described b. Used . y the ratio of their focal lengths from longest to shortest. A 100mm to 400mm zoom may be described as a 4:1 or 4× zoom.

. Used . ...

Hoist - A hoist is a device used for lifting or lowering a load by means of a drum or barrel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use cha. Used . in, fiber or wire rope as its lifting medium.

A hoist normally is used for lifting (near vertical) and a winch is normally used for pulling (near horizontal).
. Used . ...

Adaptor - A connector allowing more than 2 electrical devices to be connected to a single power source. These connections are normally in parallel (each device is given the same voltage levels), but current is . Used . divided between them. Also known as a "Twofer".

3-way splitters are known as "Threefers".. Used . ...

Used Dimmer Racks

Dimmer racks are a specialist device used to control the brightness level of lighting fixtures. Also known as dimmers, these light dimming systems adjust brightness by increasing or decreasing the voltage to the light, affecting how much actual power the lamp receives. By doing this, the light output’s intensity can be adjusted. Dimmer racks are often used in theatres and concert venues (where they are known as a touring dimmer rack), and specifically controls halogen, resistive incandescent and compact fluorescent lights. For dimming mercury vapor, solid state, fluorescent and other specialist types of lighting, more specialized equipment than a dimmer rack module is needed. There are several different types of dimmer racks available, starting with the smaller light switch size boxes that are used in homes, all the way up to large consoles which are used in concert venues, theater etc. Such professional dimmer racks are too large to be controlled directly like the ones at home, and so a DMX or DALI control system is used instead. When dimmer racks used in professional situations, changing the intensity or dimming the lights is known as “fading up” or “fading down”. It’s recommended that lights are not ‘faded’ too quickly, as doing so can damage the life expectancy of the lamp in question, although this is less of an issue with more advanced dimmer rack module units.