Used MILO

MILO Package - Complete Milo package. In great working order...

Used Meyer Sound

Conventional - Conventional lighting is made up of stationary lights that can be moved, but only via manual means of adjusting, or focusing the fixture with a yoke. However, some aspects of the lights, like brightne. Used . ss and color may be controlled remotely
by consoles or analog audio inputs. There are many different conventional lights used in stage lighting design including floodlights, pars, foll. Used . owspots, ellipsoidals, fresnels, strips and cycs. ...

Scanner - A common term for a moving mirror stage/concert light. This light in particular is common is clubs, discos and lounges. As opposed to the moving head lights that are more common for theatre, concerts. Used . and stage events. . Used .

Yoke - The metal strip running over the top and on both sides of a light to which the G-Clamp is attached. . Used . . Used . ...

Power Distro - A power distro send power evenly and appropriately to various staging and rigging equipment to insure there is enough power to properly run the various equipment.. Used . . Used . ...

Generators - Generators are used to provide power where power is otherwise not available, like in out door arenas or remote locations, or when not enough power is available at a particular location. . Used . . Used . ...

Used Line Array Speakers

Line array speakers make up a loudspeaker system to create a sound source that produces an evenly distributed sound output. The driver of each line array element is close enough to the driver of the next element to create constructive interference. The resulting sound waves go farther than sound waves from traditional loudspeakers. Line array systems date back to the early days of research in acoustics. Many old town halls and public venues still have old line source boxes which were found to project voice well though they are much smaller than horn-loaded speakers. These days, line array speakers use different drivers for high-, mid- and low-frequency passbands that must be in line. Each enclosure must be set up closely to form columns composed of these drivers. To increase the frequency range and maximum sound pressure, the number of drivers per enclosure must be increased. The orientation of line array speakers may vary. Vertical arrays are excellent for focusing sound at audiences without wasting output energy on ceilings or empty air above the audience because of its very narrow vertical output with a normally-wide horizontal pattern. On the other hand, horizontal line arrays have a very narrow horizontal output with a tall vertical pattern. For hanging concert speakers which are usually part of a concert reinforcement system, enclosures are set up together using a specialized rigging hardware and they hang from a single point. These line array speakers are curved backward at the lower portion so that the sound will reach more audience.