Used MAC 600 M

MAC 600 M - Mac 600

MAC 600 M

Magnetic Ballast Version of the MAC 600

Used Martin Professional

Martin is the maker and distributor of entertainment control and intelligent lighting and effects. Martin uses the latest technologies to create these amazing machines for the entertainment industry. Martin is also a maker of high end sound systems known as

Scanners - A scanner is an intelligent light that uses a mirror to perform a large variety of effects and operations while the fixture itself remains stationary. Scanners are generally remotely controlled by a l. Used . ighting control console, but some can be preprogrammed. A single scanner can replace the functions of many conventional lights and can often perform tasks conventional lights can not. Most m. Used . odern scanners utilize DMX-512 signals for control, but some can be controlled by way of analog signals as well. ...

Crossfade - A value of time that is assigned to a parameter that controls the duration of change from one DMX value to another DMX value or to fade from one scene to another. This is a lighting console term.. Used . . Used . ...

PAR - PAR is an acronym referring to "Parabolic Aluminized Reflector" which describes the mirror configuration. PAR lights resemble car headlights. They possess a lens, but the lens is an integral part of t. Used . he lamp and its position relative to the filament canno . Used . ...

Bump Button - A lighting console button that performs on action when pressed and another when released. This is a lighting console term.. Used . . Used . ...

Mixers - A mixer is an electronic device for combining or "mixing" audio signals by routing and changing the level, tone, and/or dynamics of the audio signals. A mixer can mix analog or digital signals depend. Used . ing on the type of mixer. The modified signals are then combined to produce a unified signal output. Mixers can vary in size and function ranging from small format having a few inputs for a . Used . DJ to large format having dozens of inputs for studio recording....

Used Moving Lights

Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting. Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator. Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators. Moving lights are hooked up to a lighting control console and send data to it in one of three ways â?? through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard). So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the â??personalityâ?� of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them â??liveâ?�, if they have the experience to do so.