The P&G fader belts ensure a very fast and direct access to all fixtures and their functions at all times. This makes the Pro II ideal for touring and show productions where direct control access is a must.
Control of up to 700 fixtures, 2048 DMX channels
Fixture library of all known manufacturers
Direct access to fixtures and their parameters
Reliable and robust construction
Advanced effect generator to be applied on all parameters
Precise timing control, individually for each fixture and their parameters
P&G fader belts for instant control of 16 parameters
MIDI/SMPTE/CD-ROM in-built as standard
Martin is the maker and distributor of entertainment control and intelligent lighting and effects. Martin uses the latest technologies to create these amazing machines for the entertainment industry. Martin is also a maker of high end sound systems known as
- Towers are truss like structures used to support roofs and other trussing systems.. Used . . Used . ...Club Systems
- A club system is an all in one audio or lighting set up designed for permanent installation in a nightclub or similar venue. Used . . Used . ...Dichroic
- In optics, the term dichroic has two related but distinct meanings. A dichroic material is one which either causes light to be split up into distinct beams of different wavelengths (colours), or, one . Used . in which light rays having different polarizations are absorbed by different amounts.
The original meaning of dichroic (from the Greek dikhroos, two-coloured) refers to any optic. Used . al device which can split a beam of light into two beams with differing wavelengths. Such devices include mirrors and filters, usually treated with optical coatings, which are designed to reflect light over a ...Lumen
- In physics, specifically photometry (optics), the lumen (symbol: lm) is the SI derived unit of luminous flux. It is the amount of light that falls on a unit spherical area at unit distance from a sour. Used . ce of one candela. In steradians this is equivalent to the amount of light that falls on a unit solid angle from a light source of one candela. Alternatively, one lumen is the total light pro. Used . duced by an isotropic light source of (1/4p) candelas. A 100 watt incandescent light bulb will output around 1500 lumens. ...Incandescent light bulb
- The incandescent light bulb (archaically known as the electric lamp) uses a glowing wire filament heated to white-hot by electrical resistance, to generate light (a process known as thermal radiation . Used . or incandescence). The bulb is the glass enclosure which keeps the filament in a vacuum or low-pressure noble gas, or a halogen gas in the case of quartz-halogen lamps (see below) in order to. Used . prevent oxidisation of the filament at high temperatures. In Australia and South Africa a light bulb is also called a light globe.
Because of its poor efficiency and yellowish color, it is being ...
Used Lighting Consoles
Lighting consoles are electronic devices for controlling multiple lights simultaneously from one point. Dimmers for controlling lighting intensity, automated lighting, fog machines and hazers are some of the special effects lighting devices controlled by a lighting board or lighting desk (other terms for lighting consoles).
An electronic control protocol is used by lighting consoles to communicate with other devices in the lighting system. Some of these are DMX512, ACN and DMX-512-A. New protocols are being introduced as more sophisticated lighting systems become available.
In the entertainment industry, where theatrical lighting design is mostly used, lighting consoles are usually found in the control booth, auditorium or the foyer. For this application, the most common protocol is DMX512.
Lighting consoles are available in different sizes and complexities. A preset board, a conventional console for basic lighting systems, is used mostly for small setups. However, DJs may complement it with more advanced hybrid consoles. A moving light controller works with dimmers for controlling ordinary lighting. It also provides additional controls for automated stage lighting (also called intelligent lighting) to produce very complex lighting effects. Other types of lighting consoles include memory consoles, personal-control based controllers, and remote focus unit.
The light board operator (also called the light op or board op) is the person who operates the lighting console. Depending on the scale and type of production, he can be the lighting designer or the stage manager. He or she is responsible for conventional or automated lighting fixtures as well as controlling video.