Bulbs - A Bulb or light bulb is a source of artificial light. There are many different kinds of bulbs including High Intensity Discharge or HIDs, Halogen, Fluorescent and Light Emitting Diodes, but the most . Used . common is the incandescence that works by the release of electromagnetic radiation. . Used . ...
Rigging Hardware - Rigging Hardware applies to all the pins, hooks and other pieces used to connect and hoist gear into place.. Used . . Used . ...
Stepper Motor - A stepper motor is a type of electric motor that is used when something has to be positioned very precisely or rotated by an exact angle.
In a stepper motor, an internal rotor containing. Used . permanent magnets is controlled by a set of stationary electromagnets that are switched electronically. Hence, it is a cross between a DC electric motor and a solenoid. Stepper motors do not. Used . use brushes and commutators.
Stepper motors have a fixed number of magnetic poles that determine the number of steps per revolution. Most common stepper motors have 200 full steps/revolution, mea
Controllers - A hoist or motor controller is a machine for raising and lowering personnel or gear by means of a cable for the purpose of setting the gear in place on a truss or stage.
. Used . . Used . ...
Followspot - Followspot is a generic term used to describe any number of lighting instruments used to highlight performers on stage. A followspot operator moves the followspot to follow the performer or to accent. Used . some action or prop etc. Somtimes called limes, dating back to the days of limelight.
Followspots are generally much brighter than conventional lighting instruments, and often u. Used . se a lamp with a considerably higher color temperature.
Used Moving Lights
Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting.
Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator.
Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators.
Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard).
So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.