Base Station - A base station is a device used to centralize and process communication signals and information between crew members. . Used . . Used . ...
Scanner - A common term for a moving mirror stage/concert light. This light in particular is common is clubs, discos and lounges. As opposed to the moving head lights that are more common for theatre, concerts. Used . and stage events. . Used .
Amplifier - The amplifier can be considered to be any device that uses a small amount of energy to control a larger amount, although the term today usually refers to an electronic amplifier. The relationship of t. Used . he input to the output of an amplifier — usually expressed as a function of the input frequency — is called the transfer function of the amplifier, and the magnitude of the transfer function . Used . is termed the gain. There are numerous types of electronic amplifier depending upon the application....
Processor Units - A processor unit is an individual piece of equipment, usually a computer, used to process editing infomation.. Used . . Used . ...
Conventional Lighting - Conventional lighting is made up of stationary lights that can be moved, but only via manual means of adjusting, or focusing the fixture with a yoke.. Used . . Used . ...
Used Moving Lights
Moving lights, or intelligent lighting as they are sometimes called, are basically a type of stage lighting that is able to move due to its integrated mechanical elements, which go beyond the moving parts that are found in more traditional, non-moving lighting.
Automated lighting such as moving lights is highly valued by stage lighting technicians as through them, it is possible to create highly complex special effects that simply cannot be made using standard, non-moveable lights. It should be noted however, that when it comes to intelligent lighting, the real intelligence lies with the programmer of the show, rather than the lighting equipment or any operator.
Moving head lights, also called moving head luminaires, are highly versatile lighting instruments capable of performing multiple lighting functions at once. They have largely superseded the use of multiple non-moving lights to create special effects, which required many lights and a large amount of skill on behalf of the operators.
Moving lights are hooked up to a lighting control console and send data to it in one of three ways – through an Ethernet control (a relatively new technology), analogue control (now almost obsolete), or DMX, (which is now the industry standard).
So long as they have been properly programmed, the optics of wiggly lights can be altered in many ways, allowing for the “personality” of the lights to be adapted almost instantaneously, depending on the requirements of the operator. Typically, moving lights will be pre-programmed before a production and controlled using simple commands, although some more experience operators may prefer to control them “live”, if they have the experience to do so.