Advanced Control Network - A new protocol designed to improve upon on the exisiting known limitations of the DMX512 protocol. It was developed by the ESTA (The Entertainment Services and Technology Association).
T. Used AF1000. he Advanced Control Network (ACN) is intended to provide the next generation standard for the distribution of data in lighting control networks.
ACN needs to do much more than jus. Used AF1000. t supercede DMX. Ideally, ACN will unify lighting control networking, allowing a single network to carry many different kinds of lighting-related data and to connect equipment from different manufacturers. ACN is no
Video - Video is the technology of electromagnetically recording, processing, transmitting, and reconstructing a sequence of images that represent scenes in motion.
. Used AF1000. . Used AF1000. ...
Ethernet - Ethernet (this name comes from the physical concept of ether) is a frame-based computer networking technology for local area networks (LANs). It defines wiring and signaling for the physical layer, an. Used AF1000. d frame formats and protocols for the media access control (MAC)/data link layer of the OSI model. Ethernet is mostly standardized as IEEEs 802.3. It has become the most widespread LAN . Used AF1000. technology in use during the 1990s to the present, and has largely replaced all other LAN standards such as token ring, FDDI, and ARCNET. ...
Fresnel - Fresnels are typically 8-, 6- or 4-inch, referring to the diameter of the lens. This light is named after Augustin-Jean Fresnel who invented the distinctive Fresnel lens which has a 'stepped' appearan. Used AF1000. ce instead of the 'full' or 'smooth' appearance of other lenses. The stepped nature of the lens causes a corresponding pattern of circles of light, so Fresnel lenses are usually 'stippl. Used AF1000. ed' on the flat side. This pattern of small bumps helps to break up the light passing into the lens to smooth out its eventual pattern.
Fresnels use a spherical reflector, with the filament of the bulb ...
Cue - Generally, a lighting board operator has a cue sheet for each scene, which is a diagram of the board with the faders in their positions as determined by the lighting designer. The operator sets the fa. Used AF1000. ders into their positions based on the cue sheets. Typically during a cue, the operator sets the next scene. Then, the operator makes the transition between the scenes using the cross-f. Used AF1000. ader....