Conventional - Conventional lighting is made up of stationary lights that can be moved, but only via manual means of adjusting, or focusing the fixture with a yoke. However, some aspects of the lights, like brightne. Used . ss and color may be controlled remotely
by consoles or analog audio inputs. There are many different conventional lights used in stage lighting design including floodlights, pars, foll. Used . owspots, ellipsoidals, fresnels, strips and cycs. ...
Intelligent Fixtures - Intelligent Fixtures or Moving Lights were originally implemented in 1972, but the first computer-controlled stage lighting fixtures began to gain widespread acceptance in the concert industry in the . Used . early 1980's. As the digital age progressed, the cost of these fixtures was reduced and they slowly started being used in more 'traditional' theatrical environments. Intelligent fixtures are . Used . currently used in almost all major theatrical productions.
Usually relying on compact arc lamps as a light source, these fixtures generally use stepper motors connected to varying internal devices...
Cue - Generally, a lighting board operator has a cue sheet for each scene, which is a diagram of the board with the faders in their positions as determined by the lighting designer. The operator sets the fa. Used . ders into their positions based on the cue sheets. Typically during a cue, the operator sets the next scene. Then, the operator makes the transition between the scenes using the cross-fader.. Used . ...
Scaffolding - Scaffolding is a temporary platform or framework, either supported from below or suspended, that is used to support people and material during the set up and deconstruction of a stage or venue.
. Used .
. Used . ...
Yoke - The metal strip running over the top and on both sides of a light to which the G-Clamp is attached. . Used . . Used . ...