Used Moving Lights

Arc Lamp - An arc lamp is a device that produces light by the sparking (or arcing, from voltaic arc or electric arc) of a high current between two carbon rod electrodes. The rods are touched and then slowly draw. Used . n apart; as the rods separate the current is "struck" and arcs across the gap in a bright, ionized path. The arc produces a temperature of several thousand degrees, and the tips of the carbon. Used . rods are heated to incandescence, creating light. The rods are slowly vaporized during the process and need to be regularly adjusted to maintain the arc. The concept was first demonstrated by Sir Humphry Davy...

MS - A stereo recording technique that uses of two different types of microphones, a directional or cardioid for the M facing forward and an omni-directional or figure-eight for the S with the lobes at a 9. Used . 0 degree angle. The main advantage being that the center sounds are not 45 degrees off-axis eliminating the gap in XY recording. Initially there were problems with reflections due to the use. Used . of two different types of mics, however mics have now been developed to overcome this problem....

Controllers - A hoist or motor controller is a machine for raising and lowering personnel or gear by means of a cable for the purpose of setting the gear in place on a truss or stage.

. Used . . Used . ...

Pre-Rig - Pre-rig Trusses have bars with lights and other gear attached so that they can be lowered into a suitable operating position for a show or raised to store or transport without having to remove the gea. Used . r from the truss.. Used . ...

Cue - Generally, a lighting board operator has a cue sheet for each scene, which is a diagram of the board with the faders in their positions as determined by the lighting designer. The operator sets the fa. Used . ders into their positions based on the cue sheets. Typically during a cue, the operator sets the next scene. Then, the operator makes the transition between the scenes using the cross-fader.. Used . ...